HOME > OUR PRODUCTS > Artline > DIY NAME STAMP

DIY NAME STAMP   EGA-C1S EGA-CSTP-K New

DIY NAME STAMP

Ideal for stamping name on plastic, metal, cloth and wood.

Features

Oil based water proof ink makes it useful for stamping on paper, plastic, metal, cloth, and wood!

Ironing is not required after stamping on the cloth.

Characters can be freely rearranged.

 Comes with an alignment guide that helps you make clear impressions.
The alignment guide can also be used as a stand for the DIY NAME STAMP.

 The cap on the holder part allows you to store it without getting ink on any surface after use.

sample

EGA-C1S

EGA-CSTP-K

  • ・Ink
  • ・Replacement Ink Pad
  • ・Stamp Pad

How to Use

1Remove the characters you need from the rubber sheet.

Characters can be removed by hand.
If characters are difficult to remove, cut using scissors.

2Insert the characters into the character holder one at a time from the right end, making sure they are facing the correct direction.

 Caution:Characters on the rubber sheet are in a mirrored format. Be especially careful when inserting lowercase letters.Set the characters with raised side on top.

1Open the lid of the stamp pad and fill the entire ink pad.

1Press the DIY NAME STAMP onto the ink pad a few times and test the stamp before making your final stamp.

This product uses an oil based quick dry ink. Always close the lid of the stamp pad after use.
The next time you use the stamp, make a test impression to check whether the ink is lighter, and refill the ink as required.

※After use, remember to replace the cap, close the lid of the stamp pad, and store horizontally.

Caution

  • An adult must be present when children are using this product.
  • This ink contains combustible solvent. Do not use near open flames.
  • The ink is a chemical product. Avoid mixing it with other inks.
  • This product is not suitable for using on PVC plastic.
    Note that some other materials may not be suitable for using.
  • Even with 100% cotton, the ink may not apply properly depending on how the fabric is woven.
  • Stamp may not be used for smaller area. In that case, use an oil based marker to write your name.
    Use an Artline permanent marker, sold separately.
  • Repeated washing may fade the impression or erase it.

Character List

DIY NAME STAMP

Item
code
EAN code/
Clam pack
ITF code/
Unit box
ITF code/
Carton
QTY/
Unit box
QTY/
Carton
EGA-C1S 4549441 103049 1454944 1103046 24549441 103043 6 sets 8 Unit boxes
(48 sets)

DIY NAME STAMP Ink Set

Item
code
EAN code/
Pc bag
ITF code/
Unit box
ITF code/
Carton
QTY/
Unit box
QTY/
Carton
EGA-CSTP-K 4549441 103056 3454944 1103057 54549441 103051 10 sets 8 Unit boxes
(80 sets)
FAQ