Xstamper

Instruction movies of refill ink for Xstamper.
If the video will not play, click on the link below to watch.

Xstamper

CE-6 / 9 / 16N
ESE-16V / 22V / 40V

Remove the holder and place drops of ink into the opening.

CA-2N / 2N(2) / 11N / 3N / 3N(2) / 1N / 1N(2) / 140N / 10N
CH-3N

Remove the holder and place drops of ink into the openings.

CD-AEC(0) / AEC(1)
CD-BEC / S / SL

  1. Remove base or impression frame from Line Dater.
  2. Cut tip of ink cartridge nozzle off about 5mm from the end.
  3. Gently squeeze ink into the hole on the right side of the date bands.

CX-M

  1. With bottom facing you, hold the dial tightly so it does not move and slide out the rubber stamp cartridge.
  2. Put about 4 to 5 drops of refill ink into the channel.
  3. To insert stamp cartridge, slide in cartridge along the rails until the cartridge clicks into place.
  4. Be sure to insert cartridge into holder starting with the double slots side first.

CE-20SN / 25SN / 30SN / 35SN / 40SN
COV-1N

Remove the holder and place drops of ink into the opening.

CD-BEC / MS / MSL

  1. Remove impression frame from Line Dater.
  2. Insert tip of cartridge into either side of the impression frame.
  3. Gently squeeze several drops of ink along the openings.

CE-30S / 50S

Remove the holder and place a few drops of ink into the opening.

CP-1EC / 2EC
ESP-1V / 2V

Remove the title plate and place 2 to 3 drops of ink into the openings.

CX-AN / BN
CA-13N / 21N / 12N
ES-AV / KV / FV / GV / 21V / 1V / BV / 2V / 3V / 12V / 13V
CX-BN(2) / GN / FN
CA-1018N

Remove the holder and place drops of ink into the openings.

ESD-33V

【Date Belt】

  1. Remove the holder.
  2. Cut tip of ink cartridge nozzle off about 5mm from the end. 
  3. Insert nozzle into hole and gently squeeze all the ink into stamp.

【Flame】

Remove the holder and place drops of ink evenly onto ink pad.

Back to How to refill