Artline

1. Twist off the nib holder.
2. Refill proper amount of the ink using a syringe.
3. Tighten the holder after refilling.

1. Open end plug cap.
2. Refill about 2ml. of the ink (ESK-20 / ESK-3) using a syringe.

1. Twist off the nib holder.
2. Refill proper amount of the ink using a syringe.
3. Tighten the holder after refilling.

1. Open end plug cap.
2. Refill about 2ml. of the ink using a syringe.

1. Twist off the nib holder.
2. Refill proper amount of the ink using a syringe.
3. Tighten the holder after refilling.

How to replace nibs

1. Pull out the nib slowly by hooking the nib holder.
2. Insert the new nib by hand until it clicks.

How to refill ink

1. Shake well the refill ink with cap before use.
2. Ensure the marker cap isclosed before removing the end plug.
3. Carefully open the refill port.
4. Apply drops of ink.
5. Always close the refill port and end plug after refilling.

1. Remove the old cartridge.
2. Take a new cartridge out of the package and twist the cover off.
3. Screw the new cartridge securely into the body.

1. Take off the cap. Place the applicator on stamp pad and press the side of the bottle slowly.
2. Put the ink uniformly on the stamp pad surface, then allow the ink to penetrate into the pad.
3. Wipe off extra ink on the applicator if necessary.