HOME > HOW TO REFILL > Artline

Artline

Artline

EK-107R / 109R

Open end plug cap.
Refill about 2ml. of the ink (ESK-20 / ESK-3) using a syringe.

EK-30 / 50 / 70 / 90 / 100 / 110 / 120 / 130 / 700 / 710

Twist off the nib holder. Refill proper amount of the ink using a syringe. Tighten the holder after refilling.

CLIX

EK-73 / 93

1.Remove the old cartridge.
2.Take a new cartridge out of the package and twist the cover off.
3.Screw the new cartridge securely into the body.

ECO-GREEN

EK-177 / 199

1.Hold ink container in an upright position. Cut the tab gently.
2.Insert barrel of refill ink deeply into marker body. Squeeze tank gently to inject all ink into marker.

WHITEBOARD MARKERS

EK-500A / 509A / 550A / 5100A / 5109A

Twist off the nib holder. Refill proper amount of the ink using a syringe. Tighten the holder after refilling.

EK-157R / 159R

Open end plug cap. Refill about 2ml. of the ink using a syringe.

EK-500 / 509

Twist off the nib holder.
Refill proper amount of the ink using a syringe. Tighten the holder after refilling.

ECO-GREEN (SPARE NIBS)

EK-527 / 529

1.Hold marker body, and pull out the old pen nib by hooking the nib holder with cap guide.
2.Hook a new pen nib in the same way, put the nib back into to the initial position firmly.
*Use after penetrating ink in pen nib and trial writing.

ECO-GREEN (REFILL INK)

EK-527 / 529

1.Hold ink container in an upright position. Cut the tab gently.
2.Insert barrel of refill ink deeply into marker body. Squeeze tank gently to inject all ink into marker.

CLIX

EK-573A / 593A

1.Remove the old cartridge.
2.Take a new cartridge out of the package and twist the cover off.
3.Screw a new cartridge securely into the body.

HIGHLIGHTERS CLIX

EK-63

1.Remove the old cartridge.
2.Take a new cartridge out of the package and twist the cover off.
3.Screw the new cartridge securely into the body.

STAMP PAD INK

EHJ-1 / 2 / 3 / 4

1. Take off the cap.
Place the applicator on stamp pad and press the side of the bottle slowly.
2. Put the ink uniformly on the stamp pad surface, then allow the ink to penetrate into the pad.
3. Wipe off extra ink on the applicator if necessary.

FAQ